Peristaltic pump is widely used in many fields of our daily life. Do you know how to use peristaltic pump to drop glue? Now please follow the peristaltic pump Xiaobian to understand it.

1. The rubber liquid contacts the runner, which is easy to pollute the machine and is not easy to clean.

2. The glue liquid is not evenly applied and the amount of glue is not easy to control.

3. The glue coating process is troublesome and the debugging is not convenient.

Because the peristaltic pump only contacts the pump pipe during transportation, it can continuously and accurately deliver the adhesive to the set position, so it can solve the problems existing in the gluing of the palm machine.

The viscosity of the glue is very high, different from the general water-based fluid, so it can ensure the high efficiency and long-term stability of glue coating. The peristaltic pump should be used in the palm machine

1. When selecting pump pipe, peristaltic pump hose with a slightly thick wall thickness shall be used.

2. The peristaltic pump hose with a slightly larger inner diameter shall be used.

3. Reduce the speed of peristaltic pump as much as possible, and the speed is usually controlled within 50rpm.

4. Regularly check and replace the pump pipe in advance to prevent the pump pipe from breaking.

5. When choosing peristaltic pump, it is necessary to choose the head of creep pump with good strength of rubber resistant and corrosion resistant structure. The best choice of the driver is the peristaltic pump with flow display function and correction function.

6. The inlet and outlet hoses of the peristaltic pump are as short as possible.

7. Attention should be paid to prevent blocking of glue coating port